01
Kamera yeINYYO Q303 Gimbal
Zvinhu Zvikuru
*Rutsigiro rwekuverenga pakati penzvimbo yekutarisa skrini uye nzvimbo dzinoenderana ne latitude;
* Nekuenderana kwakanaka kwemagetsi uye kuchinjika kwezvakatipoteredza;
* Lenzi ye25mm focal length inopa mufananidzo wakanaka wekupisa;
* Basa risingabatanidzi vanhu, nzwisisa ruzivo rwechinangwa
Magadzirirwo eZvimiro
| Kamera yeInfrared | |
| Zvinhu | Chigadzirwa chearuminiyamu chendege |
| Saizi yePod | 137.2(L)*130(W)*209.6(H)mm |
| Huremu | 1165±10g (Isina controller) |
| Kureba kwefocal kunoonekwa nzvimbo | 4.8-158mm |
| Chiedza chinoonekwa chisarudzo | 1920*1080 |
| Mifananidzo yekupisa chisarudzo | 640*512 |
| Kona yekudzora nzvimbo | 360°×N(Yaw) -120°~30°(Kudzika kwemvura) ±40°(Roll) |
| Kudzora maitiro | Kudzora kumhanya; Kudzora kona |
| Chiratidzo chekudzora | S.BUS, TTL UART, TCP, UDP |
| Vhidhiyo inobuda | 1920*1080@30fps |
| Kuchengetera mavhidhiyo | MP4 |
| Kuchengetera mifananidzo | JPG |
| Dziviriro yekupinda | IP43 |
| Nzvimbo yebasa | -20℃~60℃ |
| Nzvimbo yekuchengetera zvinhu | -30℃~70℃ |
| Vheji yekupinda | 12V |
| Simba | 11W |
| Muenzaniso wekushanda | Bvumira kutevera (zvakajairika); Dzima kutevera; Dzvanya kamwe chete pasi |
| Kudzora maitiro | Kudzora kumhanya; Kudzora makona; Nongedza pakufamba; Chinangwa kutevera |
| Kugona kuchengetedza | Mirco SD: 32GB (min)/512GB (yakanyanya) |
| Module yechiedza chinoonekwa | |
| Pikseli yechiedza chinoonekwa | Mamiriyoni mana |
| Kuona husiku | Ruvara:0.001 Lux @(F1.6,AGC ON); Dema neChena:0.0005Lux @(F1.6,AGC ON) |
| Kuyedza kwemaziso | 33x |
| Zoom yemagetsi yeHybrid | 66x |
| Basa rekupinda kwemhute | Tsigiro |
| Sensor | 1/2.8 "Progressive Scan CMOS |
| Kureba kwefocal | 4.8～158mm(33x) |
| Maitiro ekudzora zoom | Kudzora kumhanya, kutonga kwakawanda |
| FOV(H) | 57°～2.3° |
| Daro rekuziva nemaoko (munhu) | 3000m |
| Daro rekuziva nemaoko (mota) | 7000m |
| Nharaunda yekuzivikanwa kweAI (munhu) | 1900m |
| Nharaunda yekuzivikanwa kweAI (mota) | 6000m |
| Mufananidzo weThermal | |
| Sensor | Ndege yevanadium oxide isina kutonhodzwa ine infrared focal plane |
| Kureba kwefocal | 25mm |
| FOV(H×V) | 17.7°×14° |
| Kugadziriswa | 640*512 |
| Pixel pitch | 12μm |
| Rurefu rwemafungu | 8～14μm |
| Maitiro ekudzora zoom | 1～8x |
| Mapalette emavara | kupisa kutema/ kupisa kuchena/ ruvara |
| Daro rekuziva nemaoko (munhu) | 500m |
| Daro rekuziva nemaoko (mota) | 800m |
| Nharaunda yekuzivikanwa kweAI (munhu) | 300m |
| Nharaunda yekuzivikanwa kweAI (mota) | 600m |
| Module yeLaser inotenderera | |
| Nzvimbo dzakasiyana-siyana | 5～2000m |
| Kuwanda kwehuwandu | 1～4Hz |
| Maitiro ekutenderera | Kuramba uchienderera mberi; Kuramba uchienderera mberi |
| Kureba kwechiedza cheLaser | 905nm |
| Kurongeka kwenzvimbo | ± 1m |
| Chinotevera AI | |
| Mhando dzezvinangwa dzinoonekwa otomatiki | zvinangwa zvakajairika semotokari nevanhu |
| Saizi diki yechinangwa | 36×36pixel |
| Mwero wekuona chinangwa | ≥90% |
| Kurongeka kwekutevera mifananidzo | ≤1pixel |
| Nguva yekudzivirira kuvharika | 3s |
| Kumhanya kwekugadzirisa | ≥30fps(@1080P) |
| Anti deformation/ Anti target deformation kuvharika | Otomatiki |
| Kutevera kushandura chinangwa | Tsigiro |
| Nzira yekutevera chinangwa | Kutevera Kuzivikanwa, Kutevera Zvinhu |
| Sarudzo yekutevera chinangwa nzira | Kutevera mapoinzi |
| Kutevera otomatiki zoom | Tsigiro |
| Simba rekushandisa makombiyuta eNeural network | 1.0 ZVINHU ZVAKANYANYA |
Mufananidzo Wakadzama
