01
Drone ea Tlhahlobo ea Ka Hare ea Liindasteri ea S300
Likarolo tse ka Sehloohong
LI-SENSOR TSE SUPA TSE THUSANG LE TSONA LI KA FUMANA KA TSITSI
* Tšireletso ea 'Mele ea 360° 0mnidirectional
* Senotlolo sa Sebaka: Tlhahlobo e boreleli ea likarolo tse telele le tse pheta-phetoang tsa sebopeho tse kang li-weld kapa maballo e finyelloa ka ho notlela sebaka. Drone ea kahare ea indasteri ea S300 e ka boloka sebaka se behiloeng ho tloha ho 20cm ho isa ho 300cm ka bohona.
*Li-lumens tse 10K
* LiDAR: Sesebelisoa sa ho fofa sa S300L se nang le radar ea khoele e 4, e khonang ho fumana lintlha tse fihlang ho 200,000 ka mithara. Khomphutha e ka hare e hlahisa mohlala oa leru la lintlha tsa 3D ka nako ea sebele. Ho nepahala ha sebaka sa drone ho ka tlase ho 2 cm.
* Khamera ea 4K HD IMAGING: UAV ea kahare ea S300 e tla e tloaelehileng ka khamera ea 4K e nang le tlhaloso e phahameng, e khonang ho nka livideo tse nang le tlhaloso e phahameng haholo ho fihlela ho 4k60fps, e e nolofalletsang ho rekota esita le likheo tse nyane ka ho fetisisa.
* Phetiso ea 1080P HD
* Ha e na GPS
* Pono ea Sistimi e 'Meli
* Hona joale
* Ho etsa mohlala ka nako ea sebele
* Mamello e Telele ka ho Fetisisa
* BOPHELO BA BETRI E TELELE HAHOLO: Bophelo bo phahameng ka ho fetisisa ba betri ke metsotso e 12.
Liparamitha tsa Sebopeho
| Mohlala oa sehlahisoa | S300 |
| Mofuta oa Sehlahisoa | Drone ea Tlhahlobo ea Ka Hare |
| Kopo | Mohala oa liphaephe tsa motlakase, tlhahlobo ea sebopeho sa borokho jj. ho etsa lipatlisiso tsa kahare ho tekanyo |
| LIFOFANE | |
| MEA OA DYNAMIC TLHOKOMELISO | Quadrotor |
| Boholo ba Drone | 380mmx380mmx200mm |
| Boima ba 'mele | 1118g (boima ba nete) / 1750g (ho kenyeletsoa le betri) |
| Boholo ba propela | Li-inchi tse 5 |
| MISA E FETILENG EA HO TSOHA | 1910g |
| MOKHOA OA HO FUMANA | Mokhoa oa SLAM/ATTl (Boikutlo) |
| NAKO EA SEFOFA | Metsotso e 12 (ho otlolla) |
| RADIUSE EA TS'EBELETSO | ≥1.2km |
| MAMELLO | ≥10min |
| Lebelo la ho Sesisa Likepe | 2m/s |
| MOCHESO OA TŠEBELETSO | 0℃~50℃ |
| LINTHO TSE SEBELISANG | Metswako ea fiber ea carbon, li-alloy tsa magnesium, aluminium ea boemo ba aerospace, polasetiki ea thermo ea boleng bo holimo |
| TAOLO EA LIFILIMI LINTHO TSE HLOKOMELANG | iMU, mithara ea magneto, mithara ea baro, li-sensor tse peli tsa hole |
| KHOMPHUTHA E KA HARE | Prosesara ea mantlha e tšeletseng ea lapeng e sebetsang hantle haholo ea 64 - bit, sistimi ea kernel ea Linux |
| Libetri le Litjhajara | |
| Bophelo ba betri | Maeto a 100 |
| NAKO EA HO CHELETA | Metsotso e 40 |
| MATLA | 146.9wh |
| BOIMA BA BETRI | 632g |
| MOTŠOAO OA LEBITSO | 23.1v |
| MOCHESO OA TŠEBELETSO | 10℃ -45°C |
| BOKGONI BO LEKISITSOENG | 6000mAh |
| Lik'hamera tse Bonahalang tsa Leseli | |
| SENSENSOR | 1/2.3”CMOS |
| LI-PIXEL TSE SEBETSANG | 12.3M |
| LES | FOV260° |
| POTLAKO | F2.0 |
| HO HLOKOMELA | tshebetso e ntlafaditsweng ya lesedi le tlase |
| QETO EA HO REKOTA LIVIDEO | 4K Ultra HD 3840*2160@60fps |
| Lik'hamera tsa Thermalmaging | |
| Boholo ba Setshwantsho | 256x192 |
| BOLELE BA LENS FOCAL | 9.7 mm |
| Sebaka se fokolang sa ho tsepamisa maikutlo | 2m |
| Boholo ba PIXEL | 12μm |
| TŠIMO EA PONO (Fov) | 18.1°(H)x13.6°(V)x 22.6°(D) |
| BOLEMO BO PHAHAMENG BA HO BULEHA | F1.0 |
| LITŠEBELETSO TSA MABONE | |
| Mofuta oa ho Hlophisa oa ILLU | Li-LED tse 40 tse sebetsang hantle haholo |
| KHANYETSO | 10000lm |
| Balaoli ba hole | |
| MAKHETLO A TS'EBELISO | 2.4G+5.8G |
| MAMELLO EA TS'EBELETSO | Lihora tse 4 |
| SIGNAL BAN DWIOTH | 10MHZ/20MHZ/40MHZ |
| Boima | 850g |
| MOCHESO OA TŠEBELETSO | -20℃-50℃ |
| LIDAR | |
| MAQHELE A LASER | 905 mm |
| FOV | Boemo ba phetolelo 360° E otlolohileng-7°-52° |
| Sehlopha sa polokeho sa EVE | Sehlopha sa 1 (EC 60825-1:2014) Sesireletsi sa Mahlo |
| SEHLAHISO SA LERU LA LINTLHA | Lintlha tse 200,000 ka motsotsoana |
| BOEMO(@ 100KLx) | 40m @ 10%6 Ponahalo 70m @ 80% Ponahalo |
| BOKHONI BA HO KHAHLANANG LE CROSSTALK | E-ba le |
| SEBONE SA LIFOFU TSE KHUTŠOANE 2 | 0.1m |
| MATLA | 6.5W |
Setšoantšo se qaqileng
