Drone Yojambula Zithunzi za Mlengalenga ya Swan-Voyager
Zinthu Zazikulu
Drone yojambula zithunzi za mlengalenga yomwe imagwiritsa ntchito ukadaulo wa 3-axis gimbal stabilization ku ma drone ang'onoang'ono kwambiri oyenda molunjika komanso otsetsereka okhala ndi mapiko okhazikika.
*Swan Voyager imathandizira kujambula makanema a 4K, ili ndi malo otumizira mauthenga a 8km komanso nthawi yoyenda ya ola limodzi. Ndi Voyager, ogwiritsa ntchito amatha kupanga chilichonse chomwe akufuna ndikusiya malire a malo otumizira mauthenga afupiafupi komanso nkhawa ya batri.
* Amatha kulowa m'malo omwe anthu sangafikire kapena ovuta kuwafikira, kufufuza madera osadziwika, zomwe zimatithandiza kupeza malingaliro ndi zokumana nazo zatsopano.
* Magalasi a FPV apamwamba amapereka chidziwitso chowuluka bwino kwambiri ndi zithunzi zenizeni zomwe zimaperekedwa pamaso pa wogwiritsa ntchito.
Voyager ilinso ndi luso lolumikizirana ndi ma drone ambiri, zomwe zimathandiza ogwiritsa ntchito omwe ali pamtunda wa makilomita 20 kugawana malo ndi deta yochepa ya ndege, zomwe zimathandiza kuti maulendo apandege ogwirizana monga kunditsatira, kuthamanga, ndi mpikisano wosavuta wa mlengalenga.
Ntchito yolumikizirana ndi ma drone ambiri ya Voyager imalimbikitsa ubwenzi, imalimbikitsa luso, komanso imalimbikitsa kukula ndi kupita patsogolo kwa onse awiri. Drone yabwino imagwiritsidwa ntchito kujambula zithunzi zamlengalenga m'njira zosiyanasiyana.
Magawo a Kapangidwe
| Chitsanzo cha malonda | Swan-Voyager |
| Mtundu wa Chinthu | Ndege Yopanda Kujambula Zithunzi |
| Mtundu | KUCHOTSA |
| Kugwiritsa ntchito | Kujambula zithunzi za mlengalenga m'mitundu yonse ya mafayilo |
| MA PARAT ANTHU A NDEGE | |
| Mapapiko | 1.1m |
| Kulemera kwa Ndege Yopanda Kanthu | 1.12kg |
| Nthawi Yoyenda | Mphindi 50 mpaka 60 |
| Liwiro la Ndege | 10m/s-25m/s |
| Malo ozungulira | 35-40km |
| Kulemera Kwambiri Konyamuka | 1.75kg |
| Kutalika Kwambiri kwa Ndege | 500m |
| Mulingo Wotsutsa Mphepo | Gawo 5 |
| Mtunda Wotumizira Chithunzi | 1.5km |
| Kuwongolera Kwakutali Kumafupipafupi | 5.8GHz |
| Kusasinthika kwa Kutumiza kwa Lmage | 1080p |
| Miyeso ya Phukusi | 580mmX470mmX202mm |
| Gimbal | |
| Kulemera | 92g |
| Voteji | 4S (DC12V-18V) |
| Chiyankhulo Chakunja | Netiweki, UART, Mphamvu, SBUS, PWM |
| Malo Ogwirira Ntchito | -20°C mpaka +60°C |
| Kamera | |
| Kukula kwa Sensor ya Lmage | CMOS ya mainchesi 1/2.49 |
| Ma pixel | 12 miliyoni |
| Kutalika Kofanana kwa Focal | 24 mm |
| Mpata | f/2.8 |
| Gawo Loyang'ana Kwambiri | 1 m kufika pa infinity |
| Kanema wa lSO Range | 100 mpaka 3200 (yodzipangira yokha) |
| FOV | |
| Kusintha kwa Kanema | 4K: 3840x2160 @30/60fps |
| 2.7K: 2704x1520 @30/60fps | |
| 1080P:1920x1080 @30/60fps | |
| Kuchuluka kwa Khadi la SD | ≤128G (khadi la U3 la liwiro lalikulu) |
| Mtundu wa Zithunzi | JPG |
| Mtundu wa Kanema | MOV |
| Gimbal | |
| Machitidwe Ogwira Ntchito | Kukhazikika kwa ma axis atatu |
| Ma Angles Oletsa Mapulogalamu | Kutsika: -90°-- +30° ; Kuzungulira:-30°-- +30°; Kuthamanga:-120°-- +120° |
| Kapangidwe ka Makina Makona | Kuthamanga: 135°-- +45° ; Kuzungulira:-45°-- +45°; Kuthamanga:-135°-- +135° |
| Liwiro Lolamulira Kwambiri | 180°/S |
| Kugwedezeka kwa Angle | 0.005° |
| Gimbal Mode | Imathandizira kubwerera pakati pa kiyi imodzi, ntchito yotseka mutu |
Chithunzi Chatsatanetsatane
