Leave Your Message

LQ Image Data Transmission

Functional Characteristics

LQ is a 2.4G frequency band image and data transmission product designed for drone communications. It stands out in the industry for its excellent high-bandwidth transmission performance and stable performance. This product consists of two parts: the ground end and the sky end, and supports the IEEE802.11n WLAN protocol to ensure stable and efficient data transmission.

    Main Features

    Sky terminal; Small size; Light weight; Supports 8~18V wide voltage power supply; Multiple interfaces;Supports external power supply

    Structural Parameters

    Product model P600 Platform 
    Product Type UAV platform
    Model Quadcopter
    Brand Made in China
    Application Support any number of drones
    Weight 3.15Kg (including battery)
    Drone wheelbase 600mm
    Powertrain 6S FOC20A speed regulator + 4007 motor + 370mm blade
    Maximum payload 0.85Kg
    Maximum flight time 37min
    Hovering accuracy Vertical +0.1m, horizontal +0.1m (no wind conditions + RTK FIXED positioning)
    Maximum rotation angular velocity 120°/s
    Maximum tilt angle 30°
    Maximum flight speed 12m/s
    Maximum ascent speed 5m/s
    Maximum descent speed 3m/s
    Wind resistance level Level 6 and below (including level 6)
    Battery Configuration 6S10000mAh potassium polymer ultra-high voltage battery pack
    External interface configuration 3*UART interface; 1*CAN interface; 1*XT30 output (battery voltage);
    1*RC interface; 8*PWM interface
    Work Environment Outside
    Operating temperature 6°C-40°C
    Product model  LQ Image Data Transmission
    Product Type The Part of Drone
    Brand Made in China
    Application Drones 
    Maximum bandwidth 40Mbps
    Minimum delay 8ms
    Maximum distance 3000m
    Weight Sky terminal: 30.6g
    Ground terminal: 153.39
    Size Sky end: 49mmX34mmX15mm (L*W*H)
    Ground end: 94mmX64mmX23mm (L*W*H)
    Configuration Method WEB side configuration
    Working Mode AP mode, STA mode
    Network port rate 100M
    Transmit power 18dbm
    Frequency band: 2.4G frequency band
    Interface Power supply X1 (ground end: type-c, sky end: GH1.25) Ethernet port X2 (ground end: RJ45, sky end: GH1.25)
    Serial port X3 (GH1.25)
    Antenna X2 (SMA inner screw inner pin)
    Indicator Lights
    Signal indicator Red light flashing 0% Red light 20% Yellow 40% Green 60% Blue 80% White 100%
    Running indicator light STA:0.5S/1     AP:0.5s/2  Pairing: 0.2s/1
    Serial/Ethernet port indicator Display the serial port, network port link and communication status of the data transmission module
    Battery indicator (ground terminal) 4, corresponding to the current power level, flashing when charging, and always on when fully charged
    Serial port parameters
    Baud rate 300、600、1200、2400、4800、9600、19200、38400、57600, 115200 (default baud rate 57600)
    Data bits 5, 6, 7, 8, 9 (default 8 bits)
    Check digit No check, odd check, even check (default is no check)
    Serial port level TTL
    Total serial port output voltage: <500ma
    Power Requirements
    Power supply: Air terminal: 8V-18VDC, recommended value 12V/1A   Ground terminal: Type-C-5V1A
    Internal battery 3000mAh lithium battery
    Maximum usage time 7.5H
    Typical power consumption

    Air terminal: 1.5W

    Ground terminal: 1.2W

    Environmental requirements
    Sky terminal operating temperature: -10℃~+60℃
    Ground terminal operating temperature: -10℃~+45℃
    Operating humidity: 5%~85%(no condensation)

    Detail Image

    1234566778

    Video

    Leave Your Message